I-PIM ephantsi 7/16 DIN Indoda ukuya kwi-4.3-10 i-Adapter yeNdoda
Iiadapter ezenziwe yi-Telsto Development Co., Limited zikuluhlu olubanzi lolungelelwaniso olungaphakathi kuthotho okanye phakathi koluhlu, uyilo oluthe ngqo okanye olune-angle kunye nezinye ezineempawu zokunyuswa kwephaneli.
Zihlelwa ngokweemfuno zazo eziqhelekileyo ezijoliswe kuzo apho nganye ifuna iimpawu zayo ezithile.Kukho amaqela amakhulu amane achongwa ngekhowudi yombala kule khathalogu: umgangatho, ukuchaneka, i-low passive inter-modulation(PIM) kunye neeadaptha ezisebenza ngokukhawuleza.
I-Telsto RF Adapter inoluhlu olusebenzayo lwe-DC-3 GHz, inika ukusebenza kakuhle kweVSWR kunye ne-Low Passive Inter modulation {I-PIM3 ephantsi ≤-155dBc(2×20W)} .Oku kwenza ukuba ifaneleke ngokufanelekileyo ukusetyenziswa kwizikhululo zesiseko seselula, iinkqubo ze-antenna ezisasazwayo (DAS) kunye nezicelo zeeseli ezincinci.
| Imveliso | Inkcazo | Icandelo elinguNomb. |
| Iadaptha yeRF | 4.3-10 iFemale to Din Female Adapter | TEL-4310F.DINF-AT |
| 4.3-10 iFemale to Din Male Adapter | TEL-4310F.DINM-AT | |
| 4.3-10 Ibhinqa ukuya kwi-Adapter yeNdoda | TEL-4310F.NM-AT | |
| 4.3-10 Inkunzi ukuya kwi-Din i-Adapter yoMfazi | TEL-4310M.DINF-AT | |
| 4.3-10 Indoda ukuya Din Male Adapter | TEL-4310M.DINM-AT | |
| 4.3-10 Indoda ukuya kwi-Adapter yoMfazi | TEL-4310M.NF-AT | |
| Din Obhinqileyo ukuya Din Male Engile Engile Adapter | TEL-DINF.DINMA-AT | |
| N Owasetyhini kwi-Din i-Adapter yeNdoda | TEL-NF.DINM-AT | |
| N Ibhinqa ukuya kwi-Adapter yoMfazi | TEL-NF.NF-AT | |
| N Inkunzi ukuya kwi-Din i-adaptha yoMfazi | TEL-NM.DINF-AT | |
| N Inkunzi ukuya Din Male Adapter | TEL-NM.DINM-AT | |
| N Inkunzi ukuya kwi-Adapter yoMfazi | TEL-NM.NF-AT | |
| N Inkunzi ukuya kwiNduna yeAngle yokuLungisa iAdapter | TEL-NM.NMA.AT | |
| N Inkunzi ukuya kwi-Aptha yoBudoda | TEL-NM.NM-AT | |
| 4.3-10 Owasetyhini ukuya ku-4.3-10 I-Angle ye-Angle yeNdoda eLungileyo | TEL-4310F.4310MA-AT | |
| DIN Obhinqileyo ukuya Din Male Engile Right RF Adapter | TEL-DINF.DINMA-AT | |
| N I-engile yasekunene yowaseTyhini ukuya kwi-Aptha yeRF yowesifazane | TEL-NFA.NF-AT | |
| N Inkunzi ukuya kwi-4.3-10 i-Adapter yabasetyhini | TEL-NM.4310F-AT | |
| N Inkunzi ukuya kwi-N Ibhinqa eliLungileyo I-Angle Adapter | TEL-NM.NFA-AT |
Eyeleleneyo
Umzekelo:TEL-4310M.DINM-AT
Inkcazo
4.3-10 Indoda ukuya Din Male Adapter
| Izinto eziphathekayo kunye nokuPlating | |
| Uqhagamshelwano oluphakathi | Ubhedu / iSilver Plating |
| Isigquduli | PTFE |
| Umzimba kunye neKondi yangaphandle | Ubhedu / ingxubevange ehlanganiswe nge-tri-alloy |
| Gasket | Irabha yeSilicon |
| Iimpawu zoMbane | |
| Impedance yeempawu | 50 ohm |
| Uluhlu lokuphindaphinda | DC~3 GHz |
| I-Insulation Resistance | ≥5000MΩ |
| Amandla eDielectric | ≥2500 V rms |
| Ukuchasa uqhagamshelwano kwiziko | ≤3.0 mΩ |
| Ukuchasana noqhagamshelwano lwangaphandle | ≤2.0 mΩ |
| Ilahleko yokuFaka | ≤0.3dB@3GHz |
| VSWR | ≤1.1@-3.0GHz |
| Uluhlu lobushushu | -40 ~ 85℃ |
| I-PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
| Into evikela amanzi | IP67 |
Imiyalelo yokuFakelwa kwe-N okanye 7/16 okanye 4310 1/2″ intambo eguquguqukayo kakhulu
Ulwakhiwo lwesiqhagamshelo: ( Fig1 )
A. ngaphambili nut
B. umqolo nut
C. gasket
Imilinganiselo yokuhluthwa njengoko iboniswe ngumzobo (i-Fig2), ingqalelo kufuneka ihlawulwe ngelixa ihlubula:
1. Umphezulu wesiphelo somqhubi wangaphakathi kufuneka uhlanjululwe.
2. Susa ukungcola okufana nesikali sobhedu kunye ne-burr kwindawo yokugqibela yentambo.
Ukudibanisa indawo yokutywina: Khiya indawo yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kwidayagram (Fig3).
Ukudibanisa i-nut yangasemva (Fig3).
Dibanisa i nut yangaphambili nasemva ngokukruqula njengoko kubonisiwe kwidayagram ( Figs(5)
1. Ngaphambi kokujija, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nut yangasemva kunye nentambo ingashukumi, Screw kumzimba weqokobhe elikhulu kumzimba weqokobhe elingasemva.Krwela ezantsi iqokobhe elikhulu lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu.Ukudibanisa kugqityiwe.
