Intambo ye-coaxial ye-Ultra Low eguquguqukayo ye-50 ohms RF 5012S
| Ulwakhiwo | |||
| umqhubi wangaphakathi | izinto | Ucingo lwe-aluminiyam olugqunywe ngekopolo | |
| dia. | 3.55±0.04 mm | ||
| ubushushu bomzimba | izinto | i-PE efakwe igwebu ngokwasemzimbeni | |
| dia. | 9.20±0.20 mm | ||
| umqhubi wangaphandle | izinto | Ubhedu olugobileyo oluyi-helical | |
| ububanzi | 12.00±0.20 mm | ||
| ijakethi | izinto | I-PVC okanye i-PE ethintela umlilo | |
| ububanzi | 13.60±0.20 mm | ||
| iipropati zoomatshini | |||
| irediyasi egobileyo | umntu ongatshatanga ephindaphindwayo ukuhambahamba | 25 mm 30 mm 200 mm | |
| amandla okutsala | 800 N | ||
| ukumelana nokutyumza | 1.9 kg/mm | ||
| ubushushu obucetyiswayo | Ijakethi ye-PE | ivenkile | -70±85°C |
| ufakelo | -40±60°C | ||
| umsebenzi | -55±85°C | ||
| ijakethi ye-PE ethintela umlilo | ivenkile | -30±80°C | |
| ufakelo | -25±60°C | ||
| umsebenzi | -30±80°C | ||
| iipropati zombane | |||
| ukuthintela | 50±2Ω | ||
| amandla okusebenza | 82 pF/m | ||
| ukungeniswa | 0.205 uH/m | ||
| isantya sokusasazeka | 81 | ||
| I-voltage yokwaphuka kwe-DC | 2.5 | ||
| ukumelana nobushushu | >5000 | ||
| amandla aphezulu | 15.6 | ||
| ukuncitshiswa kokuhlolwa | >120 | ||
| imvamisa yokuphela | 10.2 | ||
| ukuncitshiswa kwamandla kunye nomyinge | |||
| imvamisa, iMHz | izinga lamandla @ 20°C,kW | nom.attenuation@20°C,dB/100m | |
| 10 | 10.1 | 1.04 | |
| 100 | 3.08 | 3.41 | |
| 450 | 1.38 | 7.59 | |
| 690 | 1.158 | 9.58 | |
| 800 | 1.01 | 10.40 | |
| 900 | 0.943 | 11.20 | |
| 1000 | 0.889 | 11.80 | |
| 1800 | 0.634 | 16.60 | |
| 2000 | 0.597 | 17.60 | |
| 2200 | 0.566 | 18.61 | |
| 2400 | 0.539 | 19.59 | |
| 2500 | 0.529 | 20.07 | |
| 2600 | 0.518 | 20.55 | |
| 2700 | 0.507 | 21.02 | |
| 3000 | 0.469 | 22.40 | |
| ixabiso eliphezulu lokuncitshiswa lingaba yi-105% yexabiso eliqhelekileyo lokuncitshiswa. | |||
| vswr | |||
| 820-960MHz | ≤1.15 | ||
| 1700-2200MHz | ≤1.15 | ||
| 2300-2400MHz | ≤1.15 | ||
| imigangatho | |||
| 2011/65/EU | thobela imithetho | ||
| IEC61196.1-2005 | thobela imithetho | ||
Isalathiso sokuPakisha
Imiyalelo yokufakelwa kwentambo ye-N okanye 7 / 16 okanye 4310 1 / 2″ eguquguqukayo kakhulu
Ulwakhiwo lwesixhumi: (Umfanekiso 1)
A. i-nut engaphambili
B. i-nut emqolo
I-gasket ye-C.
Ubukhulu bokuhluba bunjengoko kuboniswe kumzobo (Umfanekiso 2), kufuneka kuqwalaselwe xa kuhluba:
1. Umphezulu wokugqibela womqhubi wangaphakathi kufuneka uxovulwe.
2. Susa ukungcola okufana nesikali sekopolo kunye ne-burr kumphezulu wentambo.
Ukuhlanganisa inxalenye yokutywina: Jija inxalenye yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kumzobo (Umfanekiso 3).
Ukuhlanganisa i-nut yangasemva (Umfanekiso 3).
Hlanganisa i-nut yangaphambili neyangasemva ngokuyikrufula njengoko kubonisiwe kumzobo (Iifig(5)
1. Ngaphambi kokukrufula, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nati yangasemva kunye nentambo zingashukumi, Cinezela umzimba weqokobhe eliphambili emzimbeni weqokobhe elingasemva. Cinezela umzimba weqokobhe eliphambili lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu. Ukuhlanganiswa kugqityiwe.
