i-Tri-band Combiner (Ngaphakathi)
Iimbonakalo
● UKhokelo oluPhezulu / Ukwahlukaniswa
● Ukulinganisa kwamandla 200W ngegalelo ngalinye, ukuthembeka okuphezulu
● Ilahleko yokuFaka ePhantsi, i-VSWR ePhantsi, iPIM ePhantsi(IM3)
| Iimpawu zoMbane | |
| Impedance yeempawu | 50 ohm |
| Uluhlu lokuphindaphinda / ilahleko yokufaka | 800-960 / ≤0.6 |
| Uluhlu lokuphindaphinda / ilahleko yokufaka | 1710-1880 / ≤0.6 |
| Uluhlu lokuphindaphinda / ilahleko yokufaka | 1920-2170 / ≤0.6 |
| Uluhlu lokuphindaphinda / ilahleko yokufaka | 2500-2700/ ≤0.6 |
| Ukubekwa wedwa | ≥80 |
| VSWR | ≤1.25 |
| Amandla | 250w |
| IMD3, dBc@+43dBmX2 | ≤-150dBc |
| Ubuninzi beZiqhagamshelo | 4 |
| Uhlobo lweziqhagamshelo | DIN Matyhini |
| Ubushushu bokusebenza | -20 ukuya +55 ℃ |
| Usetyenziso | IP65 |
Imiyalelo yokuFakelwa kwe-N okanye 7/16 okanye 4310 1/2″ intambo eguquguqukayo kakhulu
Ulwakhiwo lwesiqhagamshelo: ( Fig1 )
A. ngaphambili nut
B. umqolo nut
C. gasket
Imilinganiselo yokuhluthwa njengoko iboniswe ngumzobo (i-Fig2), ingqalelo kufuneka ihlawulwe ngelixa ihlubula:
1. Umphezulu wesiphelo somqhubi wangaphakathi kufuneka uhlanjululwe.
2. Susa ukungcola okufana nesikali sobhedu kunye ne-burr kwindawo yokugqibela yentambo.
Ukudibanisa indawo yokutywina: Khiya indawo yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kwidayagram (Fig3).
Ukudibanisa i-nut yangasemva (Fig3).
Dibanisa i nut yangaphambili nasemva ngokukruqula njengoko kubonisiwe kwidayagram ( Figs(5)
1. Ngaphambi kokujija, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nut yangasemva kunye nentambo ingashukumi, Screw kumzimba weqokobhe elikhulu kumzimba weqokobhe elingasemva.Krwela ezantsi iqokobhe elikhulu lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu.Ukudibanisa kugqityiwe.
