I-telsto yangamandla
Iipliptters zamandla zizixhobo ezidlulayo zeqela leselfowuni kwiNkqubo yokuFunda (iBbs), eyahlula-hlula-hlula-hlula-hlula-hlula-hlula-hlula-hlula-hlula-hlula-hlula imiqondiso emininzi yokwenza inethiwekhi yenethiwekhi.
I-Telsto yamandla e-Telsto ikwi-2, 3 kunye neendlela ezi-4, sebenzisa i-roftity yomgca wesilivere, i-vsple ye-vswr, i-vim ephezulu, i-pim ephantsi kunye nelahleko ephantsi kakhulu. Iindlela zokuyila ezibalaseleyo zivumela iibhendi ezidlulayo ukusuka kwi-698 ukuya kwi-2700 mhz kwizindlu ezifanelekileyo. I-cavity splitters isebenza rhoqo kwi-Swioress engasebenziyo kunye neenkqubo zokuphucula ngaphandle. Kuba ilahleke ilahlekile, ilahleko ephantsi kunye ne-PIM ephantsi.
Isicelo:
Isetyenziselwa ngokubanzi i-DCS / i-CDMA / GSM / 2G / 3G / i-WiFi / i-Wimax.
1. Isetyenziswe kwi-fowunecmonionation traccountermunition yokwahlulahlula igalelo le-IPREAL kwiindlela ezininzi.
2. Unxibelelwano lonxibelelwano lwenethiwekhi yenethiwekhi kunye nenkqubo yokuhambisa i-intanethi.
3. Unxibelelwano lweqela, unxibelelwano lwesatellite, unxibelelwano olufutshane kunye ne-hoppy radio.
I-4. I-radar, indlela yokuhamba nge-elektroniki kunye nokudibana kwe-elektroniki.
I-5. Iinkqubo zezixhobo ze-aerospace.
| Ukucaciswa ngokubanzi | I-Tel-2 | I-Tel-PS-3 | I-Tel-PS-4 |
| Uluhlu lokuhamba rhoqo (MHz) | I-698-2700 | ||
| Indlela hayi (DB) * | 2 | 3 | 4 |
| Ilahleko eyahlula-hlula (i-DB) | 3 | 4.8 | 6 |
| Vswr | ≤1.20 | ≤1.25 | ≤1.30 |
| Ukufakwa kwelahleko (i-DB) | ≤0.20 | ≤0.30 | ≤0.40 |
| I-PIM3 (i-DBC) | ≤-150 (@ + 43DBM × 2) | ||
| I-Deed (ω) | 50 | ||
| Ixabiso lamandla (W) | I-300 | ||
| I-Peap Peap (W) | I-1000 | ||
| Isinxibelelanisi | Nf | ||
| Uluhlu lobushushu (℃) | -20 ~ + 70 | ||
Imiyalelo yofakelo ye-N okanye i-7/16 okanye i-4310 1/2 "Intambo eguquguqukayo
Ulwakhiwo lwesiQinisekiso: (Fit1)
A. ngaphambili ner
B. I-NT ANT
C. Gasket
Imilinganiselo yokubhabha ibonakalisiwe ngumzobo (Fit2), ingqalelo kufuneka ihlawulwe ngelixa ihlukumeza:
1. Indawo yokuphela komqhubi yangaphakathi kufuneka ichukunyiswe.
2. Susa ukungcola ezinje ngekali kunye ne-rurr kumphezulu wentambo.
Ukuhlanganisa inxenye yokutywina: SCILA Inxalenye yokutywina ngaphakathi komqhubi wangaphandle wentambo njengoko kubonisiwe ngumzobo (Fig3).
Ukudibanisa i-nati (Fig3).
Dibanisa umphambili kunye ne-Natick Nut nge-screw njengoko kubonisiwe ngumzobo (amakhiwane (5)
1. Ngaphambi kokuba isikhuseli, svaar ungqimba lwegrisi yokuthambisa kwi-o-ring.
2. Gcina i-National Nut kunye nentambo engashukumiyo, isikhafu kwiZiko le-Shell ye-Shell. Screw phantsi i-Shell ye-Shell ye-Shell yasemva kweqokobhe elisebenzisa iMonkey Wrench. Ukudibana kugqityiwe.
