I-TEL-DIN-M-2W
Imithwalo yokuphelisa ifunxa amandla e-RF kunye ne-microwave kwaye isetyenziswa rhoqo njengemithwalo yobuxoki ye-antenna kunye ne-transmitter. Ikwasetyenziswa njengeendawo zokufanisa kwizixhobo ezininzi ze-microwave ezifana ne-circular and directional coupler ukwenza ezi ndawo zingabandakanyekanga ekulinganisweni zipheliswe kwi-impedance yazo ekhethekileyo ukuze kuqinisekiswe umlinganiselo ochanekileyo.
Imithwalo yokuphelisa, ekwabizwa ngokuba yimithwalo yodoti, zizixhobo zokunxibelelana ze-passive 1-port, ezibonelela ngokuphelisa amandla okumelana ukuze kupheliswe ngokufanelekileyo i-output port yesixhobo okanye kupheliswe isiphelo esinye sentambo ye-RF. Imithwalo yokuphelisa yeTelsto ibonakaliswa yi-VSWR ephantsi, amandla aphezulu kunye nokuzinza kokusebenza. Isetyenziswa kakhulu kwi-DMA/GMS/DCS/UMTS/WIFI/WIMAX njl.
Uthotho lweeTermination Loads yimithwalo yamandla aphakathi esebenza ukusuka kwi-DC ukuya kwi-3GHz. Iifins zokupholisa zinciphisa ukunyuka kobushushu bento yokuphelisa ifilimu ekhuselayo, equlethwe ngaphakathi kwendlu ehambelanayo ngononophelo. Izihlanganisi eziqhelekileyo yi-N kunye ne-7/16 DIN, yendoda neyebhinqa.
Iimbonakalo
● Inguqulelo yeebhendi ezininzi zeDC-3GHz
● Ukuthembeka okuphezulu
● I-VSWR ephantsi
● Ilungele ukusetyenziswa kwe-BST
● Izihlanganisi ze-N kunye ne-7/16 DIN zamadoda/abafazi
| Imveliso | Inkcazo | Inombolo yeCandelo |
| Umthwalo Wokuphelisa
| N Indoda/N Ibhinqa, 2W | I-TEL-TL-NMF2WV |
| Indoda/Ibhinqa N, 5W | I-TEL-TL-NMF5W | |
| Indoda/Ibhinqa N, 10W | I-TEL-TL-NMF10W | |
| Indoda/Ibhinqa N, 25W | TE-T- NMF 2W | |
| Indoda/Ibhinqa lase-N, 50W | I-TEL-TL-NMF50W | |
| I-N Indoda/Ibhinqa, 100W | I-TEL-TL-NMF100W | |
| I-DIN Indoda/Ibhinqa, 10W | I-TEL-TL-DINMF10WV | |
| I-DIN Indoda/Ibhinqa, 25W | I-TEL-TL-DINMF25W | |
| I-DIN Indoda/Ibhinqa, 50W | I-TEL-TL-DINMF50W | |
| I-DIN Indoda/Ibhinqa, 100WV | I-TEL-TL-DINMF100WV |
| Inombolo yeCandelo | Uluhlu lweeFrequency (MHz) | i-lmpedance(O) | Uvavanyo lwaMandla (W) | I-VSWR | Uluhlu lobushushu(°C) |
| I-TEL-TL-NM/F2W | DC-3GHz | 50 | 2 | 1.15: 1 | -10-50 |
| I-TEL-TL-NM/F5W | DC-3GHz | 50 | 5 | 1.15: 1 | -10-50 |
| I-TEL-TL-NM/F10W | DC-3GHz | 50 | 10 | 1.15: 1 | -10-50 |
| I-TEL-TL-NM/F25W | DC-3GHz | 50 | 25 | 1.15: 1 | -10-50 |
| I-TEL-TL-NM/F50W | DC-3GHz | 50 | 50 | 1.15: 1 | -10-50 |
| I-TEL-TL-NM/F100W | DC-3GHz | 50 | 100 | 1.25: 1 | -10-50 |
| I-TEL-TL-DINM/F10W | DC-3GHz | 50 | 10 | 1.15: 1 | -10-50 |
| I-TEL-TL-DINM/F25W | DC-3GHz | 50 | 25 | 1.15: 1 | -10-50 |
| I-TEL-TL-DINM/F50W | DC-3GHz | 50 | 50 | 1.15: 1 | -10-50 |
| I-TEL-TL-DINM/F100W | DC-3GHz | 50 | 100 | 1.25: 1 | -10-50 |
Isalathiso sokuPakisha
Imiyalelo yokufakelwa kwentambo ye-N okanye 7 / 16 okanye 4310 1 / 2″ eguquguqukayo kakhulu
Ulwakhiwo lwesixhumi: (Umfanekiso 1)
A. i-nut engaphambili
B. i-nut emqolo
I-gasket ye-C.
Ubukhulu bokuhluba bunjengoko kuboniswe kumzobo (Umfanekiso 2), kufuneka kuqwalaselwe xa kuhluba:
1. Umphezulu wokugqibela womqhubi wangaphakathi kufuneka uxovulwe.
2. Susa ukungcola okufana nesikali sekopolo kunye ne-burr kumphezulu wentambo.
Ukuhlanganisa inxalenye yokutywina: Jija inxalenye yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kumzobo (Umfanekiso 3).
Ukuhlanganisa i-nut yangasemva (Umfanekiso 3).
Hlanganisa i-nut yangaphambili neyangasemva ngokuyikrufula njengoko kubonisiwe kumzobo (Iifig(5)
1. Ngaphambi kokukrufula, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nati yangasemva kunye nentambo zingashukumi, Cinezela umzimba weqokobhe eliphambili emzimbeni weqokobhe elingasemva. Cinezela umzimba weqokobhe eliphambili lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu. Ukuhlanganiswa kugqityiwe.
