I-Penta-band I-COLOBER 4 × 1
Iimbonakalo
● Indidi ephezulu / ukuhlala yedwa
● Inqanaba lama-200w nge-200w yegalelo, ukuthembeka okuphezulu
● Ilahleko yokufakelwa esezantsi, i-vswr ephantsi, i-pim ephantsi (im3)
| Iimpawu zombane | |
| IIMPAWU ZOKUGQIBELA | I-50 ye-OHM |
| Ukulahleka kobubanzi / ukufakwa kwe-Rip | I-780-960 / ≤0.35 |
| Ukulahleka kobubanzi / ukufakwa kwe-Rip | 1710-1880 / ≤0.35 |
| Ukulahleka kobubanzi / ukufakwa kwe-Rip | Ngo-1920-2170 / ≤0.35 |
| Ukulahleka kobubanzi / ukufakwa kwe-Rip | 2500-2700 / ≤0.35 |
| Ukubekwa wedwa | ≥50 |
| Vswr | ≤1.22 |
| Amandla | 200w |
| Imd3, i-DBC @ + 43dbMX2 | ≤-150dBc |
| Ubungakanani be-chanch | 5 |
| Uhlobo lwe-Conners | Umfazi we-DS |
| Iqondo lokusebenza | -20 ukuya +65 ℃ |
| Izicelo | Ip66 |
| I-DC / AISG ERRORENT | Ngokudlula (max. 25a) |
| Ukhuseleko lokukhusela | 3ka, 10/350 yase-US |
| Ukunyuka | Ukuphakamisa udonga |
Imiyalelo yofakelo ye-N okanye i-7/16 okanye i-4310 1/2 "Intambo eguquguqukayo
Ulwakhiwo lwesiQinisekiso: (Fit1)
A. ngaphambili ner
B. I-NT ANT
C. Gasket
Imilinganiselo yokubhabha ibonakalisiwe ngumzobo (Fit2), ingqalelo kufuneka ihlawulwe ngelixa ihlukumeza:
1. Indawo yokuphela komqhubi yangaphakathi kufuneka ichukunyiswe.
2. Susa ukungcola ezinje ngekali kunye ne-rurr kumphezulu wentambo.
Ukuhlanganisa inxenye yokutywina: SCILA Inxalenye yokutywina ngaphakathi komqhubi wangaphandle wentambo njengoko kubonisiwe ngumzobo (Fig3).
Ukudibanisa i-nati (Fig3).
Dibanisa umphambili kunye ne-Natick Nut nge-screw njengoko kubonisiwe ngumzobo (amakhiwane (5)
1. Ngaphambi kokuba isikhuseli, svaar ungqimba lwegrisi yokuthambisa kwi-o-ring.
2. Gcina i-National Nut kunye nentambo engashukumiyo, isikhafu kwiZiko le-Shell ye-Shell. Screw phantsi i-Shell ye-Shell ye-Shell yasemva kweqokobhe elisebenzisa iMonkey Wrench. Ukudibana kugqityiwe.
