Isixhumi se-N sabasetyhini i-RF Coaxial Dummy Load 10W
Imithwalo yokuphelisa ifunxa amandla e-RF kunye ne-microwave kwaye isetyenziswa rhoqo njengemithwalo yobuxoki ye-antenna kunye ne-transmitter. Ikwasetyenziswa njengeendawo zokufanisa kwizixhobo ezininzi ze-microwave ezifana nokujikeleza kunye ne-directional couple ukwenza ezi ndawo zingabandakanyekanga kumlinganiselo zipheliswe kwi-impedance yazo ekhethekileyo ukuze kuqinisekiswe umlinganiselo ochanekileyo.
Imithwalo yokuphelisa, ekwabizwa ngokuba yimithwalo yodoti, zizixhobo zokunxibelelana ze-passive 1-port, ezibonelela ngokuphelisa amandla okumelana ukuze kupheliswe ngokufanelekileyo i-output port yesixhobo okanye kupheliswe isiphelo esinye sentambo ye-RF. Imithwalo yokuphelisa yeTelsto ibonakaliswa yi-VSWR ephantsi, amandla aphezulu kunye nokuzinza kokusebenza. Isetyenziswa kakhulu kwi-DMA/GMS/DCS/UMTS/WIFI/WIMAX njl.
| Zombane | |
| Ukuphazamiseka kwempawu | 50 Ohm |
| Uluhlu lweeFrequency | DC-3GHz |
| Ukufuma okusebenzayo | 0-95% |
| I-VSWR | ≤1.2 |
| Umthamo wamandla (W) | 10W |
| Isinxibelelanisi | Ibhinqa lase-N |
| Okusingqongileyo kunye noomatshini | |
| Uluhlu lobushushu | -40℃ ~ +85℃ |
Inkonzo yethu
1. Inkxaso yezakhono zobungcali.
2. Iinkonzo ze-OEM ziyafumaneka.
3. Phendula kwiiyure ezingama-24.
4. Siza kuzama konke okusemandleni ethu ukukunika inkxaso nantoni na oyifunayo kwaye sinokuyenza.
| Imveliso | Inkcazo | Inombolo yeCandelo |
| Umthwalo Wokuphelisa | Indoda N / Ibhinqa N, 2W | I-TEL-TL-NM/F2W |
| Indoda/Ibhinqa, 5W | I-TEL-TL-NM/F5W | |
| Indoda/Ibhinqa, 10W | I-TEL-TL-NM/F10W | |
| Indoda yase-N / Ibhinqa lase-N, 25W | I-TEL-TL-NM/F25W | |
| Indoda yase-N / Ibhinqa lase-N, 50W | I-TEL-TL-NM/F50W | |
| Indoda/Ibhinqa, 100W | I-TEL-TL-NM/F100W | |
| I-DIN Indoda/Ibhinqa, 10W | I-TEL-TL-DINM/F10W | |
| I-DIN Indoda / Ibhinqa, 25W | I-TEL-TL-DINM/F25W | |
| I-DIN Indoda/Ibhinqa, 50W | I-TEL-TL-DINM/F50W | |
| I-DIN Indoda/Ibhinqa, 100W | I-TEL-TL-DINM/F100W |
Imiyalelo yokufakelwa kwentambo ye-N okanye 7 / 16 okanye 4310 1 / 2″ eguquguqukayo kakhulu
Ulwakhiwo lwesixhumi: (Umfanekiso 1)
A. i-nut engaphambili
B. i-nut emqolo
I-gasket ye-C.
Ubukhulu bokuhluba bunjengoko kuboniswe kumzobo (Umfanekiso 2), kufuneka kuqwalaselwe xa kuhluba:
1. Umphezulu wokugqibela womqhubi wangaphakathi kufuneka uxovulwe.
2. Susa ukungcola okufana nesikali sekopolo kunye ne-burr kumphezulu wentambo.
Ukuhlanganisa inxalenye yokutywina: Jija inxalenye yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kumzobo (Umfanekiso 3).
Ukuhlanganisa i-nut yangasemva (Umfanekiso 3).
Hlanganisa i-nut yangaphambili neyangasemva ngokuyikrufula njengoko kubonisiwe kumzobo (Iifig(5)
1. Ngaphambi kokukrufula, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nati yangasemva kunye nentambo zingashukumi, Cinezela umzimba weqokobhe eliphambili emzimbeni weqokobhe elingasemva. Cinezela umzimba weqokobhe eliphambili lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu. Ukuhlanganiswa kugqityiwe.
