Umgangatho ophezulu we-DC-3.0GHz DIN uhlobo lwe-100W RF Dummy Load / Umthwalo wokuphelisa Umfanekiso obonisiweyo

Umgangatho ophezulu we-DC-3.0GHz DIN uhlobo lwe-100W RF Dummy Load/Extermination Load

Indawo Yokuqala:eShanghai, eTshayina (eMainland)

Igama lebrand:ITelsto

Inombolo yoMzekelo:I-TEL-TL-DINM/F100W

Amandla:100W

Izihlandlo:3GHz

I-VSWR: <1.2:1

I-IP (ingangenisi uthuli namanzi):IP65

Thumela i-imeyile kuthi

Inkcazo

Iinkcukacha

Inkxaso yeMveliso

Imithwalo yokuphelisa ifunxa amandla e-RF kunye ne-microwave kwaye isetyenziswa rhoqo njengemithwalo yobuxoki ye-antenna kunye ne-transmitter. Ikwasetyenziswa njengeendawo zokufanisa kwizixhobo ezininzi ze-microwave ezifana nokujikeleza kunye ne-directional couple ukwenza ezi ndawo zingabandakanyekanga kumlinganiselo zipheliswe kwi-impedance yazo ekhethekileyo ukuze kuqinisekiswe umlinganiselo ochanekileyo.

Imithwalo yokuphelisa, ekwabizwa ngokuba yimithwalo yodoti, zizixhobo zokunxibelelana ze-passive 1-port, ezibonelela ngokuphelisa amandla okumelana ukuze kupheliswe ngokufanelekileyo i-output port yesixhobo okanye kupheliswe isiphelo esinye sentambo ye-RF. Imithwalo yokuphelisa yeTelsto ibonakaliswa yi-VSWR ephantsi, amandla aphezulu kunye nokuzinza kokusebenza. Isetyenziswa kakhulu kwi-DMA/GMS/DCS/UMTS/WIFI/WIMAX njl.
Iinkcukacha zobugcisa:

Imveliso	Inkcazo	Inombolo yeCandelo
Umthwalo Wokuphelisa	Indoda N / Ibhinqa N, 2W	I-TEL-TL-NM/F2W
	Indoda/Ibhinqa, 5W	I-TEL-TL-NM/F5W
	Indoda/Ibhinqa, 10W	I-TEL-TL-NM/F10W
	Indoda yase-N / Ibhinqa lase-N, 25W	I-TEL-TL-NM/F25W
	Indoda yase-N / Ibhinqa lase-N, 50W	I-TEL-TL-NM/F50W
	Indoda/Ibhinqa, 100W	I-TEL-TL-NM/F100W
	I-DIN Indoda/Ibhinqa, 10W	I-TEL-TL-DINM/F10W
	I-DIN Indoda / Ibhinqa, 25W	I-TEL-TL-DINM/F25W
	I-DIN Indoda/Ibhinqa, 50W	I-TEL-TL-DINM/F50W
	I-DIN Indoda/Ibhinqa, 100W	I-TEL-TL-DINM/F100W

I-100W Coaxial Fixed Termination Load yenye yeeTelsto RF Load Products Line. ITelsto inako.

ukuvelisa nokubonelela nge-1W, 2W, 5W, 10W, 15W, 20W, 25W, 30W, 50W, 100W, 200W, 300W, 500W RF.

Umthwalo ongaqhelekanga. I-frequency ingafikelela kwi-DC-3G, DC-6G, DC-8G, DC-12.4G, DC-18G, DC-26G, DC-40G. Ii-RF Connectors zingaba yi-N-type, SMA-type, DIN-type, TNC-type kunye ne-BNC-type.

Inkonzo yethu
1. Inkxaso yezakhono zobungcali.
2. Iinkonzo ze-OEM ziyafumaneka.
3. Phendula kwiiyure ezingama-24.
4. Siza kuzama konke okusemandleni ethu ukukunika inkxaso nantoni na oyifunayo kwaye sinokuyenza.

Uthotho lweeTermination Loads yimithwalo yamandla aphakathi esebenza ukusuka kwi-DC ukuya kwi-3GHz. Iifins zokupholisa zinciphisa ukunyuka kobushushu bento yokuphelisa ifilimu ekhuselayo, equlethwe ngaphakathi kwendlu ehambelanayo ngononophelo. Izihlanganisi eziqhelekileyo yi-N kunye ne-7/16 DIN, yendoda neyebhinqa.

Iimbonakalo
● Inguqulelo yeebhendi ezininzi zeDC-3GHz
● Ukuthembeka okuphezulu
● I-VSWR ephantsi
● Ilungele ukusetyenziswa kwe-BST
● Izihlanganisi ze-N kunye ne-7/16 DIN zamadoda/abafazi

Inombolo yeCandelo	Uluhlu lweeFrequency (MHz)	i-lmpedance(O)	Uvavanyo lwaMandla (W)	I-VSWR	Uluhlu lobushushu(°C)
I-TEL-TL-NM/F2W	DC-3GHz	50	2	1.15: 1	-10-50
I-TEL-TL-NM/F5W	DC-3GHz	50	5	1.15: 1	-10-50
I-TEL-TL-NM/F10W	DC-3GHz	50	10	1.15: 1	-10-50
I-TEL-TL-NM/F25W	DC-3GHz	50	25	1.15: 1	-10-50
I-TEL-TL-NM/F50W	DC-3GHz	50	50	1.15: 1	-10-50
I-TEL-TL-NM/F100W	DC-3GHz	50	100	1.25: 1	-10-50
I-TEL-TL-DINM/F10W	DC-3GHz	50	10	1.15: 1	-10-50
I-TEL-TL-DINM/F25W	DC-3GHz	50	25	1.15: 1	-10-50
I-TEL-TL-DINM/F50W	DC-3GHz	50	50	1.15: 1	-10-50
I-TEL-TL-DINM/F100W	DC-3GHz	50	100	1.25: 1	-10-50

Ngaphambili: Umthwalo wohlobo lwe-DIN Male Type 50W

Okulandelayo: Umgangatho ophezulu we-DC-3.0GHz N uhlobo lwe-100W RF Dummy Load/Extermination Load

Imiyalelo yokufakelwa kwentambo ye-N okanye 7 / 16 okanye 4310 1 / 2″ eguquguqukayo kakhulu

Ulwakhiwo lwesixhumi: (Umfanekiso 1)
A. i-nut engaphambili
B. i-nut emqolo
I-gasket ye-C.

Imiyalelo yoFakelo001

Ubukhulu bokuhluba bunjengoko kuboniswe kumzobo (Umfanekiso 2), kufuneka kuqwalaselwe xa kuhluba:
1. Umphezulu wokugqibela womqhubi wangaphakathi kufuneka uxovulwe.
2. Susa ukungcola okufana nesikali sekopolo kunye ne-burr kumphezulu wentambo.

Imiyalelo yoFakelo002

Ukuhlanganisa inxalenye yokutywina: Jija inxalenye yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kumzobo (Umfanekiso 3).

Imiyalelo yoFakelo003

Ukuhlanganisa i-nut yangasemva (Umfanekiso 3).

Imiyalelo yoFakelo004

Hlanganisa i-nut yangaphambili neyangasemva ngokuyikrufula njengoko kubonisiwe kumzobo (Iifig(5)
1. Ngaphambi kokukrufula, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nati yangasemva kunye nentambo zingashukumi, Cinezela umzimba weqokobhe eliphambili emzimbeni weqokobhe elingasemva. Cinezela umzimba weqokobhe eliphambili lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu. Ukuhlanganiswa kugqityiwe.

Imiyalelo yoFakelo005