Uhlobo lweClamp Through yeFeeder

Indawo Yokuqala:IShanghai, iTshayina (eMainland)

Igama lebrand:ITelsto

Inombolo yoMzekelo:I-clamp ye-feeder yohlobo lwe-1/2'' x2 enemingxuma emibini

Igama lento:I-clamp ye-feeder yohlobo lwe-1/2'' x2 enemingxuma emibini

izinto:Yenziwe ngentsimbi eshayinayo

Izinto zePlastiki:I-Polypropylene (PP) / ABS

Iklasi yeClamp:Uhlobo

Umbala:mnyama, isilivere, ngwevu

Esemgangathweni okanye Engengomgangatho:Umgangatho

Isitaki seClamp:Inye, Iphindwe kabini, Isithathu, Isitayile esiphindwe kane

Intambo yoQhagamshelo:I-RG8, RG213, LMR400 Coaxial

Thumela i-imeyile kuthi

Inkcazo

I-Hanger isetyenziselwa kakhulu ukubopha phakathi kwentambo ye-RF kunye nenqaba, ileli yentambo njl.njl., eyenziwe kakhulu ngentsimbi engagqwaliyo kunye ne-anti-ultraviolet polypropylene okanye iplastiki yobunjineli ye-ABS kunye nerabha elwa nokuguga, kwaye ingasetyenziswa kumanqanaba ahlukeneyo obushushu. Senza ii-hangers ezahlukeneyo ukuhlangabezana neemfuno ezahlukeneyo zabathengi bethu.

Uphawu lwemveliso:

1. I-feeder clamp eyilwe ngokwemigangatho ye-2. YD/T109.

3. Ifanelekile kwintambo eyi-1/4'', 3/8'', 1/2'', 7/8'', 1-1/4'', 1-5/8'', kunye ne-2-1/4''.

4. Uhlobo: uhlobo oludlulayo, ecaleni kohlobo lodonga, uhlobo lwendlebe ye-anchor, uhlobo lwehoko; uhlobo lwe-hose clamp, uhlobo lwentambo yokuvuza.

5. Yenziwe ngeentsimbi ezinganyangekiyo ezilwa ne-asidi ezinomgangatho ophezulu kwiinkqubo ze-microwave nezeselula

I-Anti-corrosion (i-trans natures polypropylene kunye ne-non-rusting) phantsi kweemeko zemozulu ezahlukeneyo

Ububanzi besicelo

Isikhululo seenkonzo zonxibelelwano, iGSM, iCDMA, iGPRS njalo njalo.

Ububanzi besicelo:

Isikhululo sonxibelelwano oluhambayo (i-GSM, i-CDMA, i-GPRS, njl.njl.)

I-Cable Clamp ye-Feeder --- Iphepha leDatha

Igama lento:	Inkcazo
Imodeli:	I-TEL-X
Ubungakanani besicelo	Intambo yeFiber ye-Optical eyi-5~8mm + Intambo yeCoaxial eyi-9~13mm
Isitaki seClamp:	Isitaki esinye (iindlela ezi-2)
	I-Double Stack (iindlela ezi-4)
	I-Triple Stack (iindlela ezi-6)
	Kane (iindlela ezi-8)
Izinto zePlastiki:	I-Polypropylene (PP)
Izinto zeClamp Inner:	Irabha ethambileyo
Izinto zesinyithi:	304 Intsimbi Engagqwaliyo
Izinto ezikwi-“U” clamp kunye neThread Rod	Intonga yoMsonto ye-304SS M8
Intambo yoQhagamshelo:	1/4'', 1/2", 7/8", 1-1/4", 1-5/8" Isixhobo sokutya esiqinileyo
Intambo yoQhagamshelo:	RG8, RG213, LMR400 njl. Intambo yeCoaxial
Iwaranti yomgangatho:	Ayinamhlwa kwaye ayibanda kakhulu xa isetyenziswa ngaphakathi/ngaphandle.
Ubushushu bokusebenza:	-50°C- +70°C
Ukupakisha	Ingxowa/iseti yepoly, ibhokisi,
Ixesha lokuhlawula	T/T, L/C, umanyano lwaseNtshona