I-DIN yoBudoda Uhlobo lomthwalo 1W
Isicelo
I-Mobile Communication Network Optimization kunye nenkqubo yokusasazwa kwangaphakathi.
UNxibelelwano lweQela, uNxibelelwano ngeSathelayithi, uThungelwano lwamaza amafutshane kunye nonomathotholo weHopping.
I-Radar, i-Electronic Navigation kunye ne-Electronic Confrontation.
Iinkqubo ze-Aerospace Equipment.
| Izinto eziphathekayo kunye nokuPlating | |
| Uqhagamshelwano oluphakathi | Ubhedu / iSilver Plating |
| Isigquduli | PTFE |
| Umzimba kunye neKondi yangaphandle | Ubhedu / ingxubevange ehlanganiswe nge-tri-alloy |
| Gasket | Irabha yeSilicon |
| Iimpawu zoMbane | |
| Impedance yeempawu | 50 ohm |
| Uluhlu lokuphindaphinda | DC~6 GHz |
| Ukufuma okuSebenzayo | 0-90% |
| Ilahleko yokuFaka | 0.08-0.12 @ 3GHz-6.0GHZ |
| VSWR | 1.08-1.2@3GHZ-6.0GHZ |
| Uluhlu lobushushu ℃ | -35~125 |
Iimbonakalo
● Inguqulelo ye-Multi-band ye-DC-3GHz
● Ukuthembeka okuphezulu
● I-VSWR ephantsi
● Ilungele izicelo ze-BST
● I-N & 7 / 16 ye-DIN yendoda / yabasetyhini izixhumi
| Imveliso | Inkcazo | Icandelo elinguNomb |
| Ukuphelisa Umthwalo
| N Indoda / N Owasetyhini, 2W | TEL-TL-NMF2WV |
| N Indoda / N Owesetyhini, 5W | TEL-TL-NMF5W | |
| N Indoda / N Ibhinqa, 10W | TEL-TL-NMF10W | |
| N Indoda / N Owesetyhini, 25W | TE-T- NMF 2W | |
| N Indoda / N Ibhinqa, 50W | TEL-TL-NMF50W | |
| N Indoda / N Ibhinqa, 100W | TEL-TL-NMF100W | |
| I-DIN indoda / ibhinqa, i-10W | TEL-TL-DINMF10WV | |
| I-DIN indoda / iNtukazi, i-25W | TEL-TL-DINMF25W | |
| I-DIN indoda / ibhinqa, i-50W | TEL-TL-DINMF50W | |
| I-DIN indoda / ibhinqa, i-100WV | TEL-TL-DINMF100WV |
| Icandelo elinguNomb. | Uluhlu lokuphindaphinda (MHz) | lmpedance(O) | Umlinganiselo wamandla (W) | VSWR | Uluhlu lobushushu(°C) |
| TEL-TL-NM/F2W | DC-3GHz | 50 | 2 | 1.15: 1 | -10-50 |
| TEL-TL-NM/F5W | DC-3GHz | 50 | 5 | 1.15: 1 | -10-50 |
| TEL-TL-NM/F10W | DC-3GHz | 50 | 10 | 1.15: 1 | -10-50 |
| TEL-TL-NM/F25W | DC-3GHz | 50 | 25 | 1.15: 1 | -10-50 |
| TEL-TL-NM/F50W | DC-3GHz | 50 | 50 | 1.15: 1 | -10-50 |
| TEL-TL-NM/F100W | DC-3GHz | 50 | 100 | 1.25: 1 | -10-50 |
| TEL-TL-DINM/F10W | DC-3GHz | 50 | 10 | 1.15: 1 | -10-50 |
| TEL-TL-DINM/F25W | DC-3GHz | 50 | 25 | 1.15: 1 | -10-50 |
| TEL-TL-DINM/F50W | DC-3GHz | 50 | 50 | 1.15: 1 | -10-50 |
| TEL-TL-DINM/F100W | DC-3GHz | 50 | 100 | 1.25: 1 | -10-50 |
Ukupakisha Reference
Imiyalelo yokuFakelwa kwe-N okanye 7/16 okanye 4310 1/2″ intambo eguquguqukayo kakhulu
Ulwakhiwo lwesiqhagamshelo: ( Fig1 )
A. ngaphambili nut
B. umqolo nut
C. gasket
Imilinganiselo yokuhluthwa njengoko iboniswe ngumzobo (i-Fig2), ingqalelo kufuneka ihlawulwe ngelixa ihlubula:
1. Umphezulu wesiphelo somqhubi wangaphakathi kufuneka uhlanjululwe.
2. Susa ukungcola okufana nesikali sobhedu kunye ne-burr kwindawo yokugqibela yentambo.
Ukudibanisa indawo yokutywina: Khiya indawo yokutywina ecaleni komqhubi wangaphandle wentambo njengoko kubonisiwe kwidayagram (Fig3).
Ukudibanisa i-nut yangasemva (Fig3).
Dibanisa i nut yangaphambili nasemva ngokukruqula njengoko kubonisiwe kwidayagram ( Figs(5)
1. Ngaphambi kokujija, gcoba umaleko wegrisi yokuthambisa kwi-o-ring.
2. Gcina i-nut yangasemva kunye nentambo ingashukumi, Screw kumzimba weqokobhe elikhulu kumzimba weqokobhe elingasemva. Krwela ezantsi iqokobhe elikhulu lomzimba weqokobhe elingasemva usebenzisa isikrufu senkawu. Ukudibanisa kugqityiwe.
